The Fila CONCRETE SHIELD stain-resistant protector is ideal for concrete, stamped concrete, self-locking concrete and concrete tiles.
WHAT IT IS USED FOR
- To revive concrete surfaces inside and outside and protect against stains and water.
- Creates a protection that facilitates the removal of oil and grease before they penetrate the surface.
- For outdoor applications on self-locking, terrazzo tiles and stamped concrete, it provides resistance to atmospheric agents.
- On industrial floors, warehouses, showrooms and garages, it consolidates the surface making it dustproof.
- On internal floors for residential use, the treatment can be completed by applying a wax finish.
THE ADVANTAGES
- Eco-compatible product: without hydrocarbon solvents
- Reversible treatment
- Consolidating and anti-dust action
- Resists UV rays (ASTM G154)
- Water-based: can be applied to surfaces with residual humidity: work times drastically reduced
HOW TO USE
-
No dilution: ready for use.
- Shake before use. On a dry and clean surface, apply CONCRETE SHIELD with a brush, fleece or roller on a regular basis. Once the first coat is dry (after 4 hours), in the case of an absorbent surface, apply a second coat of product following the same methods. For environments domestic interiors: 4 hours after applying CONCRETE SHIELD, apply a coat of finishing wax depending on the desired aesthetic effect: matt MATT, glossy LONGLIFE. For exteriors: it is recommended to apply the product annually to maintain an optimal reviving aesthetic effect .
Attention:
In case of incorrect application and when a total protection restoration is necessary, remove CONCRETE SHIELD using PS87 PRO. On internal floors for domestic use (microcement, quartz cement, etc.) carry out a compatibility test with the surface before carrying out the treatment. In the case of smooth cements or those with a smooth finish, CONCRETE SHIELD may not adhere correctly. For this reason it is advisable to carry out a small preliminary test. Do not apply the product outdoors if rain is forecast. The use of the product on external surfaces, in humid environments and where there is water stagnation (bathrooms, showers) is not recommended. In the case of material installed with an open joint and not grouted, the protection concerns the tile and not the entire surface. Check the reviving effect on a small portion before applying the product. For daily and extraordinary maintenance, avoid using alkaline-based degreasing detergents. Use only the appropriately diluted CLEANER PRO neutral detergent.
INDICATIVE YIELD
With one liter of product I make: Cement 10-15 m²