Protective Fila Prw200 1L prefuge for non-polished stone and agglomerates, terracotta and klinker.
WHAT IT IS USED FOR
- Water-based waterproofing effective against installation dirt, which facilitates the grouting operation and subsequent cleaning without altering the appearance of the materials.
- Ideal for absorbent materials such as terracotta, clinker, natural, reconstructed and agglomerated stones.
THE ADVANTAGES
- Protects against grout.
- Does not alter the adhesion of the joint to the material.
- Simplifies cleaning after installation.
- Reduces drying times, making subsequent treatment quicker.
- Does not alter the appearance of the material.
- Not sacrificial.
- Easy to apply.
- After application it is possible to carry out any protection treatment.
- Product with very low VOC emissions: certified by GEV and marked by EC1Plus contributes to the achievement of LEED credits.
HOW TO USE
-
No dilution: ready for use.
-
Application: Shake before use. Remove all dust present on the surface to be treated. Spread a coat of PRW200 evenly with a brush, fleece or other applicator, avoiding surface stagnation. Apply carefully also to the edges of the laid material. Grouting can be carried out the day following application. Once seasoning is complete, wash after installation with the most suitable cleaner for the type of material. Evaluate the subsequent protective treatment to complete the protection.
-
FOR PROFESSIONAL USE ONLY: on vertical surfaces apply by spray (airless system) dosing the product to waste and using the appropriate PPE, as indicated in the safety data sheet.
Attention:
Test the product on a small portion of the surface to check for any
color changes.
Do not apply the product outdoors if rain is forecast.
INDICATIVE YIELD
With one liter of product I do:
- Rustic Impruneta terracotta, sanded 15/20 m²
- Handmade terracotta, Spanish, tiles, bricks 7/10 m²
- Stone 10/20 m²