The Fila WP70 5L Concrete Reviving Protective Protector protects and revives internal and external concrete, self-locking and concrete terrazzo surfaces.
WHAT IT IS USED FOR
- To revive concrete surfaces inside and outside
and protect against stains and water.
- Creates a protection that facilitates the removal of oil and grease
before they penetrate the surface.
- For outdoor applications on self-locking, terrazzo tiles
and stamped concrete, it provides resistance to atmospheric
agents.
- On industrial floors, warehouses, showrooms and
garages, it consolidates the surface making it dustproof.
- On internal floors for residential use, the treatment
can be completed by applying a wax finish.
THE ADVANTAGES
- Eco-friendly: without hydrocarbon solvents.
- Water based.
- Reversible product.
- Does not yellow.
- Resists UV rays (ASTM G154)
- Consolidating and anti-dust.
- Ideal for indoors and outdoors.
- Applicable on vertical and horizontal surfaces.
HOW TO USE
-
No dilution: ready for use.
-
For outdoors: shake before use.
On a dry and clean floor, apply FILA WP70 evenly on the surface with a brush, fleece or roller.
Once the first coat is dry (after 4 hours), in the case of an absorbent surface, apply a second coat of product following the same methods.
On some materials installed externally, it is recommended to apply the product annually to maintain an optimal reviving aesthetic effect.
-
For interiors: shake before use.
On a dry and clean floor, apply FILA WP70 evenly on the surface with a brush, fleece or roller.
Once the first coat is dry (after 4 hours), in the case of an absorbent surface, apply a second coat of product following the same methods. After 4 hours, in domestic environments, it is possible to apply a coat of finishing wax depending on the desired aesthetic effect: matt FILAMATT, glossy FILALONGLIFE.
-
NOTE: In case of bad application and when a total protection restoration is necessary, remove FILA WP70 using FILAPS87.
Attention:
In the case of smooth cements or those with a smooth finish, the FILA WP70 may not adhere correctly. For this reason it is advisable to carry out a small preliminary test.
Do not apply the product outdoors if rain is forecast. The use of the product is not recommended in humid environments and where there is water stagnation. In the case of material installed with an open joint and not grouted, the protection concerns the tile and not the entire surface. Check the reviving effect on a small portion before applying the product. For daily and extraordinary maintenance, avoid using alkaline-based degreasing detergents. Use only the appropriately diluted FILACLEANER neutral detergent.
INDICATIVE YIELD
With one liter of product I do: 10/15 m2