La Fila Matt 1L protective wax with natural effect.
COTTO, KLINKER, STONE AND NON-POLISHED AGGLOMERATES, TUFF, RESIN
WHAT IT IS USED FOR
- For the maintenance and matt finish of treatments on terracotta, clinker, antique marble and natural stone floors.
- It is the ideal finish after water-based waterproofing.
- Ideal on internal brick and natural stone walls, on decorative plaster, reconstructed stone and concrete coverings to prevent dusting and provides surface consolidation.
THE ADVANTAGES
- Gives a natural effect.
- It has a high concentration: it can be used at various dilutions depending on need.
- Polished, it allows you to obtain a satin effect.
- It is completely removable.
- It has excellent self-levelling power.
- It repels dirt and dust.
HOW TO USE
-
For the protection of floors and walls: Slightly dilute MATT to make it more fluid and facilitate its application by adding 200 ml of water per liter of product. On a dry and clean surface, apply an even coat of MATT with a fleece (wall brush). Wait until it is completely dry (about an hour) and then apply a second coat in a criss-cross direction to the first. Once dry (about an hour) the floor can be walked on. If you want a slight increase in gloss, you can wipe with a woolen cloth or a polisher. On terracotta and highly absorbent stones (e.g. pietra serena, raw quartzite) it is recommended to first apply a coat of waterproofing such as FOB XTREME or W68.
- For maintenance:
-
Renewal of the finish (every 2-3 months): after cleaning the surface with a diluted solution of CLEANER PRO (1:200), apply MATT diluting 500 ml. of product in 5 liters of water. Once dry, the floor can be walked on. Restoration of protection (once a year): apply the slightly diluted wax (200 ml of water per liter of product) with a fleece, rag or other applicator. Once dry, the floor can be walked on. For the anti-dusting treatment: on a dry surface, apply an even coat of pure MATT product with a brush. After about an hour the treated surface is dry.
ATTENTION
It is possible to remove the product using the specific water-based
wax remover PS87 PRO.
The use of the product on external surfaces, in humid environments and where there is
stagnation of water is not recommended. water (baths, showers).
The product can change the aesthetic appearance of the material, check
beforehand on a small portion of the surface.
INDICATIVE YIELD
With one liter of product I do:
- Cotto 30 m²
- Stone 30/40 m²