Fila Instant Remover 750 ml instant cleaner for fresh cement grout.
PORCELAIN STONEWARE, CERAMIC, GLASS MOSAIC, KLINKER
WHAT IT IS USED FOR
- Eliminates residues of fresh cement grout, even with additives.
- Ideal for cleaning the back of large slabs before installation.
- Ideal for cleaning grouting tools after use.
- Prevents the formation of a dulling ring caused by failure to remove grout residues.
THE ADVANTAGES
-
RAPID DRY TECHNOLOGY: fast-acting, to be used at the same time as installation.
- It does not foam and does not require rinsing.
- Safe for the operator and the environment.
- Respect the materials and joints.
- High yield.
- Does not damage aluminum and steel profiles.
- Does not emit harmful fumes.
- Can be used indoors and outdoors, on floors and walls.
-
Patented product: application system with effective and certified final result.
HOW TO USE
-
No dilution: ready for use.
-
Application: Once grouted, wait for the mixture to thicken and become
opaque (generally 10 to 30 minutes) in accordance with the times provided by the manufacturer. Proceed with an initial cleaning of the surface with a damp sponge. Proceed with the final cleaning or the fresh finishing operation. Spray INSTANT REMOVER evenly on the surface. Leave to act for 1-2 minutes depending on the finish of the material. Operate with a damp sponge trowel, taking care to rinse it frequently to keep it clean. In case of stubborn residues, go over again 1 hour after grouting following the instructions just described. For commissioning, refer to the stucco manufacturer's instructions. Cleaning with INSTANT REMOVER can only be carried out at the same time as installation. If it has not been carried out, we recommend using DETERDEK PRO acid descaling detergent for cleaning at the end of the construction site.
Warning:
Do not use on polished marble and on all materials sensitive to acids.
Check with a preliminary test the actual resistance of the grout to the product
on a small portion of the surface.
For aluminum elements, use the product according to the instructions for use.
Avoid the use of abrasive sponges.
Do not apply strong pressure during the washing phase because they can
affect the escape.
INDICATIVE YIELD
approximate for 750ml
- Large format tiles up to 350 linear meters
- Mosaic Up to 15 m²